home *** CD-ROM | disk | FTP | other *** search
/ HyperLib 1997 Winter - Disc 1 / HYPERLIB-1997-Winter-CD1.ISO.7z / HYPERLIB-1997-Winter-CD1.ISO / オンラインウェア / SND / Sound Sculptor II 2.0.sit / Sound Sculptor II 2.0 / Sculpted Curl Q Tutorial < prev    next >
Text File  |  1993-07-23  |  4KB  |  89 lines

  1.  
  2. Here is a step by step tutorial on how メSculpted Curly Qモ was made from メCurly Qモ using Sound Sculptor. When your done, you will know how to add vibrato using the Pitch LFO, change the pitch over time with the Pitch Envelope, and add Echo and Reverb to a sound. Try playing the sound after each effect so you can hear how the effect changes the sound. 
  3.  
  4. Start Sound Sculptor.
  5.  
  6. Open メCurly Qモ.
  7.  
  8. Click past the end of the sound to place the cursor at the end of the sound.
  9.  
  10. Select メOscillatorモ from the Processors menu to display the dialog box.
  11. Click on the メOscillatorモ popup menu and select メSilenceモ from the list of waveforms. 
  12. Leave the メFrequencyモ field alone, it's not used for メSilenceモ. 
  13. Leave the メLengthモ in samples field alone. 
  14. Set メLengthモ to 3 seconds.
  15. Click on メOKモ to process the Oscillator.
  16.  
  17. Select メLoopモ from the Processors menu to mark the newly created "Silence" as a loop so you can easily select that portion of the sound later.
  18.  
  19. Select the part of the sound that says メthinkモ when itユs played. If メthinkモ is selected, when you play the sound, you should only hear メthinkモ.
  20.  
  21. Select メEchoモ from the Processors menu to display the dialog box.
  22. Set メEchoモ to 99%.
  23. Set メDelayモ to .125 seconds. 
  24. Set メRepeatモ to 30 times. 
  25. Set メFilterモ to 25%. 
  26. Click on the arrow popup menu next to メFilterモ, and select メLow Passモ.
  27. Click on メOKモ to process the Echo.
  28.  
  29. Hold down the option key and select メFit Soundモ from the Edit menu.
  30.  
  31. Select メSelect Loopモ from the Edit menu.
  32.  
  33. Select メEnvelopeモ from the Processors menu. Now the sound window is in envelope mode. An envelope has been drawn on top of the sound with メtagsモ at the beginning and ending of the envelope, and an Envelope popup menu has been added to the lower left of the window, it should say "Amplify".
  34. Select メPitchモ from the Envelope popup menu.
  35. Select メResetモ from the Envelope popup menu.
  36. Select メx1モ from the Envelope popup menu, and a menu will appear, select メx4モ.
  37. Click on the last envelope メtagモ and drag it to the top of the window.
  38. Select メOKモ from the Envelope popup menu to process the envelope.
  39.  
  40. Select メSelect Loopモ from the Edit menu if necessary.
  41.  
  42. Select メEnvelopeモ from the Processors menu.
  43. メPitchモ should already be selected in the Envelope popup menu.
  44. Select メx4モ from the Envelope popup menu, and a menu will appear, select メx1モ.
  45. Click on the last envelope メtagモ and drag it to the top of the window.
  46. Select メLFOモ from the Envelope popup menu to display the dialog box.
  47.     Click on the メLFOモ popup menu and select メSineモ from the list of waveforms. 
  48.     Set メFrequencyモ to 2.25 Hertz. 
  49.     Leave メPhaseモ and メInvertモ alone for now. 
  50.     Click on メOKモ to set the LFO settings.
  51. Select メOKモ from the Envelope popup menu to process the LFO.
  52.  
  53. Click past the end of the sound to place the cursor at the end of the sound.
  54.  
  55. Select メOscillatorモ from the Processors menu to display the dialog box.
  56. Click on the メOscillatorモ popup menu and select メSilenceモ from the list of waveforms. 
  57. Leave the メFrequencyモ field alone, it's not used for メSilenceモ. 
  58. Leave the メLengthモ in samples field alone. 
  59. Set メLengthモ to 1 second.
  60. Click on メOKモ to process the Oscillator.
  61.  
  62. Select the entire sound by double clicking on the sound.
  63.  
  64. Select メReverbモ from the Processors menu to display the dialog box.
  65. Set メReverbモ to 60%.
  66. Set メDelayモ to .25 seconds.
  67. Set メFeedbackモ to 60%.
  68. Set メFilterモ to 25%.
  69. Click on the arrow popup menu next to メFilterモ, and select メHigh Passモ.
  70. Click on メOK to process the Reverbモ.
  71.  
  72. Click on the Play button (the arrow) of the Tools pallet. It should play the entire sound.
  73.  
  74. You're finished! 
  75. The sound you just made should sound the same as メSculpted Curly Qモ.
  76.  
  77. If you have any questions about any terms used in this tutorial, 
  78. Select "Help" from the Apple menu to display the Help window.
  79. Select "Glossary" from the Misc. menu.
  80.  
  81.  
  82. If you have any questions, suggestions, or bugs to report, E-mail me at:
  83.         America Online: JeffS87
  84.         Compuserve:  74353,3243
  85.  
  86. Sound Sculptor II Copyright ゥ 1994-1995 Jeff Smith.  All rights reserved.
  87.  
  88.  
  89.